Installing The Tv Switch Box
The TV Switch Box connects to the VHF antenna terminal at the back of your television set, and converts your television display from regular TV programming to your ATARI 800 Computer. If you also have cable TV, you can connect the switch box to the cable service as well. 1 Disconnect the present antenna or cable from the TV and reconnect it to the side of the TV Switch Box labeled ANTENNA. If it is a flat, twin-lead cable, connect it to the terminals marked 300 OHM on the TV Switch Box. If you...
Connecting The Computer Console
5 Locate the round cord that comes from the back of the computer console. Plug the end of this cord into the terminal on the TV Switch Box labeled COMPUTER GAME . Then move the switch into the COMPUTER GAME position. 7 Set the Channel Select Switch on the right side of the computer console to the same channel. After you turn on the computer, you may need to adjust the fine-tuning knob on your TV to improve the reception. 6 Turn on your TV set and tune it to Channel 2 or 3 -whichever is weaker...